$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Topeak's Mini Morph is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Mini Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose and a T handle. A frame mount is included, too.
Like bringing your floor pump on the trail. High-volume barrel fills fat tires fast while fold-out foot pad and flexible hose make inflation a snap. - Head: Presta/ Schrader/ Dunlop Valves - Barrel: Butted Aluminum - Thumb Lock: Plastic - Handle: T-Type Plastic/Kraton - Capacity: 160 psi / 11 bar - Added Features: Fold-out Foot Pad - Flexible Hose - Centerline Mount Bracket - Size (L x W x H): 35 x 5.8 x 3 cm - 13.8" x 2.3" x 1.2' - Weight: 250g / 8.80 oz
Topeak's Pocket Rocket boasts an aluminum barrel for superb function, durability and max pump power, while its plastic handle ensures pumping comfort. And, its aluminum thumb-lock head fits both Presta and Schrader valves.
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).
$9.95 - $99.99
Planet Bike's line of CO2 replacement cartridges makes tire repairs quick and easy. - Planet Bike's CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators. - Planet Bike cartridges are tested to the highest standards for durability, safety, and reliability. They contain pure CO2 with no oils or contaminants. - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2
You'll have a whole lotta love for this CO2 inflator on long rides. It fits Presta and Schrader valves and weighs next to nothing. The cartridge is insulated with a sleeve to prevent frozen fingers and the small size means the Red Zeppelin fits easily in bags, pockets and packs. Two 16-gram cartridges are included. Now you'll never be stuck like a "Fool in the Rain."
You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."
Lightweight and easy to use, MSW’s Jetstream adjustable inflator head works with all 3/8" threaded inflation canisters and allows you to vary the CO2 flow to avoid overfilling your tires. - Adjustable airflow with a convenient shut-off feature - Easily pushes onto Presta or threads onto Schrader valve tubes - Knurled knob for reliable grip even with mittens or gloves - Kit comes with two 20g cartridges
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - AirLift mini frame pump with a large chamber, locking handle and carrying mount
This extra-large, 40-gram threaded air canister packs as much volume as two 20-gram cartridges with half of the weight while boosting available pack space. - Inflator operates at temperatures above 40 degrees Fahrenheit - Canister contains propane for lighter canister weight and increased gas volume - Propane does not affect tubeless sealant - Canister must be used with nozzle facing down - Fits 3/8-inch threaded inflators with 5mm depth from pin to edge of threading
- CNC machined aluminum barrel provides a strong, durable body with best-in-class design - Extendable hose with threaded valve help user pump easily and confidently - Roller system valve head eliminates the need to twist the pump as user threads onto the valve - 160psi rating
$57.75 - $61.00
When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Liv Tire Levers
- Easy-to-read 2.5" raised gauge - Durable steel barrel and base - Ergonomic handle with ball inflation accessory storage - AutoHead™ with anodized alloy accents and pressure release button - 160psi rating
$32.00 - $40.00
- Easy-to-read 3.0" gauge - AutoHead™ with ball inflator accessories - Aluminum barrel and plastic base - 160psi rating
Inflating up to 120psi and handling both Presta and Schrader valves, Control Tower 4 is constructed with a reinforced composite barrel and plastic base. With an ergonomic handle it comes fully loaded with a ball needle and inflator for a practical, multi purpose pump. - DoubleHead valve - Ball inflator accessories included - Plastic barrel and base - Durable steel shaft
These 16-gram cartridges can be used with Genuine Innovations' Second Wind MTB, Ultraflate and Proflate models as well as other cupped inflators.
The Digital Shock Pump gives you an exact pressure setting to make suspension and seatpost setup easier and repeatable every time. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - LCD display panel - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder and foldable hose
High Pressure Shock Pumps to maintain your shock and seat post air pressure. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder - Foldable hose
$21.99 - $27.99
Crank Brothers' Gem Pump packs a powerful punch for its small size and low weight. It'll inflate your tires to 130psi quickly with its dual-piston design. Plus, its aluminum barrel and high-volume/high-pressure (off-road/road tires) settings make inflation easy. The Gem fits Schrader and Presta valves, too.
A Shop Quality Precision Pump For The Home Mechanic. Meet the Core Pro, our top of the line floor pump. Constructed of durable 6061 Alloy, the Pro stands at nearly 29 inches tall, giving it the largest air chamber in our line. That means less pumps for greater pressure. The Pro also boasts a 51-inch hose to reach your bike, even if it's on the back of your car. Our AirTap head is designed to be compatible with Presta, Schrader and even Dunlop valves and it features an in-line bleed button for pressure perfection. Did we mention it might just be the best looking cycling accessory you own? Airtap Core Pump Head - Our AirTap reversible pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Gauge - The massive, 3-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core pump's solid stance. Extra-Long Hose - Whether your bike is on a hitch rack, in the work stand or at the trail head, we've got you covered. The Core Pro floor pump boasts a 51-inch-long hose to reach just about anywhere. 6061 Alloy Construction - The handle, air chamber and base of the Core Pro are constructed of 6061 alloy. Strong enough for aircraft means it's a perfect material for a shop-level floor pump.
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included
Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!
Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.
Page 1 of 7 Next page