Filter By:
- Hitch-Mount (47)
- Pickup/RV/Spare-Tire Mount (19)
- Roof-Mount (52)
- Trunk-Mount (15)
- Parts & Accessories (130)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Car Racks

$64.95
12 x 100mm fork adapter for use with 9mm fork-mount bike racks.
- 12mm x 100mm
- Axle not included. Works with your bike's thru-axle
- Built-in safety tabs
- Durable black powder-coat finish
- All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts
Product Specs:
- Weight: 0.41 lbs.
- Dimensions: L 4.50 in x W 1.25 in x H 4.00 in
- Limited Lifetime Warranty

$59.00 - $64.95
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack.
- Axle not included. Works with your bike's thru-axle
- Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc.
- Built-in safety tabs
- Durable black powder-coat finish
Product Specs:
- Weight: 0.32 – 0.38 lbs.
- Minimum Crossbar Spread 16in
- Maximum Crossbar Spread 42in
- Limited Lifetime Warranty

$39.95
Thule's versatile Low Rider is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. Made of heavy-duty metal for strength and reliability, the Low Rider boasts a pass-through hole for locking your rig with a cable lock, too.

$69.95
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 4 locks, all using the same key

$259.95
Upright bike carrier for the quickest, most convenient mounting – for bikes up to 44 lbs.
- 2 One Key lock cylinders (sold separately) lock the bike to carrier and carrier to rack.
- Mounts to all Thule rack systems, round bars and most factory racks
- Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray
- Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting
- Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage
- Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw
- Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps
- Easy, tool-free interface for switching carrier from one side of your car to the other.

$49.99
Made to fit Seasucker's Bomber and Mini Bomber bike racks – just swap the Add-On Front Wheel Holder for one of the fork mounts, and now your front wheel doesn’t have to ride in the trunk anymore. Elongated entry slots for the skewer allow the wheel to rest on the platform of the rack, providing additional stability when driving. Made for standard road, cross and MTB wheels, but requires the MTB Plugs (sold separately) to hold a 15/100mm or 15/110mm (Boost) through-axle. Made from .25-inch powder-coated aluminum.
Fits all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.

$19.99
The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of yesterday, today, and tomorrow. Interchangeable plugs fit into an anodized aluminum extrusion (sold separately). These interchangeable plugs fit into an anodized aluminum extrusion (sold separately).
Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.

$19.99 - $34.99
The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of yesterday, today, and tomorrow. These interchangeable plugs fit into an anodized aluminum extrusion (sold separately).
Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.

$49.99
Our high-end Komodo rack (rest assured, though, it works with any of our fork-mount racks) demanded some way to carry the front wheel as well, and the Hogg seemingly popped into existence. Replace your rear wheel’s axle nut with the anodized aluminum Hogg nut and then you can screw on the Hogg body when you’re ready to transport your bike. Your front wheel’s quick-release skewer clamps onto the Hogg body and off you go! Comes with an anti-rotation strap to stop your wheel from spinning pointlessly when attached. For quick-release hubs only.

$489.00
2019 Model Mini Bomber comes standard with our Universal Huske Fork Mount upgrade, with 9mm plugs and quick release skewer. The Mini Bomber is probably our most versatile model. This 2-bike fork-mount rack is designed to attach to your car’s roof, trunk, or your SUV’s back glass. The HDPE body flexes to conform to your car’s curves. With four 6-inch SeaSucker vacuum mounts, this rack has plenty of muscle. Fits on virtually any car. Minimal assembly required.

$299.00
2019 Model Talon comes standard with our Universal Huske Fork Mount upgrade, 9mm plugs and a quick release skewer. The Talon is our workhorse, 1-bike carrier and our best seller. It’s a fork-mount-style rack, with three of our powerful 210 lb. pull-strength rated vacuum cups holding it onto your car’s roof, trunk or back glass. A 22-inch Rear Wheel Strap is included to secure the back tire. This rack is small and light enough to fit into a bike bag or carry-on luggage for you adventurous types who travel with your bikes. Probably the easiest rack in the world to install, and removes in just seconds without the need for glue or costly installation. Fits on virtually any car. Minimal assembly required.

The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.

$259.99
What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX.
Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor.
And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style.
Product Features
- Best fit around: fits 89% of the top vehicles sold, including those with spoilers.
- VIP Treatment: premium bike hold downs that are easy to use and quick to load.
- Clean, Sleek Look: integrated strap management eliminates flapping straps.
- Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come.
- Carries 3 bikes (35lb/bike).
- Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits.
- Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs.
- Premium bike hold downs that are easy to use and quick to load.
- Integrated strap management system provides clean look and eliminates flapping straps.
- Best-in-class ratchet straps speedily fasten bike to the rack.
- Strongest frame on the market.
- Built with 100% recyclable materials.
- Rust-free injection molded plastic.
- Articulated rubber feet to protect paint.
- Arc–based design separates bikes on different levels.
- Patents issued and pending.
- Lightweight at 11 lbs.

- Carries 2 bikes (35 pounds/bike).
- Preassembled.
- Injection-molded arms are strongest in the market.
- Arms fold up and down with ease for quick storage and easy loading.
- Welded steel mainframe.
- Rack tilts down with pull of handle for easy access to rear of vehicle.
- Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes.
- Fits 1-¼-inch or 2-ubcg hitches out of the box.
- Hitch lock sold separately (Model 3022).
- Lightweight, steel construction weighs only 15 pounds.
- Made in Madison, WI.

$299.99
The Bones Hitch 4-Bike rack is born out of the design and function of Saris' best-selling Bones rack and brought to life in the form of a hitch rack. You wanted a nicely designed, tilting rack at a great value, and you wanted it to be lightweight. The result is the Bones Hitch. The Bones Hitch is one of the lightest racks in the marketplace yet every bit as strong and durable. That's why Saris backs it—along with all of their racks—with a lifetime warranty. Stylish, lightweight, easy to use and made here in the USA—who says you can't have it all?
- Carries 4 bikes, up to 35 pounds each.
- Preassembled in box.
- Rack tilts down with pull of handle for easy access to rear of vehicle.
- Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes.
- Fits 1-¼-inch or 2-inch hitches out of the box.
- Lifetime warranty.
- Made in Madison, WI.
- Injection-molded arms are strongest in the market.
- Arms fold up and down with ease for quick storage and easy loading.
- Welded steel mainframe.
- Hitch lock sold separately (Model 3022).
- Lightweight, steel construction weighs only 20 lbs.

Transport all types of bikes with Saris’ Freedom 4-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright supports. It uses quick-adjust trays and ratcheting straps to secure four bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright supports even tilt down to allow trunk access.

$24.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

With its robust construction, eye-catching style and compact design that carries both bikes on a single bar, the SuperClamp is your bike’s new BFF. This lightweight – yet mighty – platform hitch rack is ready to hit the road at a moment’s notice. Whether you’re hauling eBikes, beefy mountain bikes, your prized TT rig, or an assortment of bicycles, the SuperClamp’s dual shepherd’s hooks promise all bikes a truly secure ride without touching the bike’s frame.
And thanks to the SuperClamp’s tilting feature, no more unloading bikes to let the dog out of the back. Simply tilt down and release the hounds. Top it all off with integrated locks, a built-in bottle opener and head-turning reflectors, the SuperClamp 2-bike is proof that you can have your cake and eat it too.
- Fastest loading bike rack around thanks to the dual wheel-clamping hooks (bonus: no frame contact).
- Lightweight, yet mighty! Weighs only 35 lb, and is rugged enough to carry 2 bikes, up to 60 lb each.
- Features integrated locks and reflectors for extra security and visibility, day and night.
- Open Sesame! Tilting feature allows hatch access, even when fully loaded, and folds up when not in use.
- Sleek and compact design holds 2 bikes on a single bar.

$999.99
When adventure calls, you need a hardy bike rack to get you and your collection of bikes there. That’s why Saris built the SuperClamp 4-bike from the ground-up to be the safest, toughest, and lightest 4-bike platform hitch rack on the road. It all comes down to its super compact design, with two bikes carried on a single horizontal bar. Plus, each bike rack undergoes unparalleled testing in the heart of tundra country – meaning, if it survives in Wisconsin, it will thrive wherever your compass leads.
When it comes to durability, versatility and carrying capacity, the SuperClamp 4-bike packs a punch in its light, 63 lb package. In fact, the SuperClamp is 40% lighter than similar platform hitch racks, yet is guaranteed to last a lifetime thanks to its tough steel construction. Load it up with mountain bikes, electric bikes, kid’s bikes, road bikes, insert-any-bike-type-here bike, and the SuperClamp will carry them safely to their destination. No matter where your bike wants to go, the SuperClamp 4-bike is up for the challenge.
- Rock-solid dual hooks provide unmatched security, and never touches the bike’s frame.
- Brawny, yet lightweight – designed to carry two bikes on a single bar for a footprint that is both compact and able to carry up to 4 bikes of any type (190 lb total).
- Load ‘em up! Crafted to haul a wide variety and combination of bikes.
- Tilting feature allows access to rear of vehicle, even when fully loaded (your dog will thank you), and folds up when not in use.
- Functional, eye-pleasing design that looks good on any car and features integrated locks, reflectors and of course - a bottle opener.

Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).

$15.00
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks.
- Not for use on our original NV rack.

$198.00 - $249.00
No hitch? No roof bars? Kuat Highline is the answer. Easily mount Kuat’s Highline to almost any vehicle. Perfectly at home hauling your machine to the local group ride or your families stable of bikes to the greenway.
Rugged construction, smart user-friendly design, and sleek aesthetics make the Highline trunk rack a staple in any cyclist’s garage.
The Highline has 2 or 3 bike options available and is constructed with lightweight and durable aluminum. Intuitive tray pivot design makes it a snap to prep for loading. Your bikes will be carried with the Highline’s exclusively designed cradles featuring integrated straps and anti-sway to keep your bicycle in place. An industry-first protective film is included with each Highline because we like your vehicle’s paint too.

$89.00
RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes.
- Supports up to a 4-bike rack (100 lb max)
- All hardware included
- 2" hitch and 1.25" hitch adaptor included
- Magnetic faceplate

$629.00
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on.
- Re-designed pivot with optional foot assist
- Semi-integrated bike lock
- Front tire ratchet design with an intuitive release
- Rear tire cradle features a co-molded strap to protect wheels
- Folding front cradle adds space between rack and vehicle
- No-tool install with hand tight hitch cam system
- Gloss metallic powder available in 3 colors
- Low profile arced design delivers an amazing look
- 2 Bike capacity up to 40 lbs. each
- Holds wheelbases up to 47-inch and tires as large as 3-inch
- Increased spacing between bikes to 14-inch
- Lightweight platform rack design as low as 32lbs (assembled)
- Available in both 2-inch & 1.25-inch hitch sizes

$30.00
Delta's Wheel Holder mounts to any flat surface to keep bikes stabilized.
- Holds front wheel in place
- Rigid steel stays with 9mm dropouts
- Mounts to any flat surface

$349.00
Hitch rack swing adapter.
Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido.
Product Details:
- Hitch extension converts most 2" hitch products to a swing-away rack
- Provides easy tailgate access - even with a rack fully loaded with bikes
- Easily swings open 90 degrees and locks in place with the simple to use release lever
- Safety latch secures the rack closed while you're on the road
- Secures to any 2" hitch receiver using a threaded pin
- Included SKS (Same Key System) lock keeps the rack secure
- 250 lb maximum load capacity (rack plus gear)
Product Specs:
- Weight: 35.46 lbs
- Dimensions: L 20.00" x W 30.00" x H 8.00"
Installation Details:
- Some Assembly Required
- 10 Minute Install
- 2" Hitch Receiver Required
Compatible with the following:
- Dr.Tray- 2" only (without the EZ+1 attached)
- SingleSpeed
- HangOver 4 - 4 Bike only
- TwoTimer
- HoldUp EVO
- HoldUp EVO +2
- HoldUp
- HoldUp +2
- FourTimer
- LongHaul (Vans and Passenger Vehicles Only)
- RoadTrip (Vans and Passenger Vehicles Only)

$72.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

$295.00
Is your vehicle roof looking a bit naked? Add the BaseLine FX, an advanced roof rack with integrated crossbars and towers that has no bar overhang so your vehicle will have a clean, modern aesthetic. The easy-to-adjust design means it adapts to the shape of your vehicle's roof for a secure, ready-to-load roof rack.
Page 1 of 9
Next page